Question about the groundable Naturell Ultra Canopy
Hi Shaun
I'm planning to buy one of your Swiss Naturell Ultra externally conductive groundable queen sized canopies. I already have 2 of your ethernet/computer/multiport grounds that are fabulous, and 2 of your power strips. About to buy more, plus your cool wall usb recharger with grounded outlets.
Just a couple questions about the canopy. I already use a Dream Canopy, grounded. But I have concerns about future flaking and durability - and I need a 2nd canopy that I can travel with without tearing my whole set-up apart every time. I plan to use the Ultra as my home canopy.
The grounding is important as I have stray electricity from the school across the street at night. The Dream Canopy does mostly work (although I have to clip a horizontal sheet grounded to the inside of the closed canopy about 2 feet above the mattress in the same plane - because I get voltage inside the canopy.)
1. So the surface of the Ultra must be metal to be groundable, right? I can put a gator clip on it anywhere and ground to that, right?
2. If the metal is exposed, is there any question of flaking in the future?
3. Do you think it will ground as well as the dream canopy? (Sorry I know you don't sell this and I couldn't find out on the net what the thing is actually made of!)
4. Is the Ultra pretty breathable?
5. I use a furniture grade pvc tubing frame that the canopy hangs over. Any reason I couldn't hang the ultra over a frame?
I use a floor sheet, and a wire to an outside ground separate from the regular house ground. I shut off all the fuses to the room. I've got wireless emf under control, but nighttime voltage is still somewhat a work in progress.
Hope this makes sense. I live in the middle of a large city, loaded with emf. I know very little about electricity, just what I read - lots of trial and error. I've got a gigahertz electric/mag meter but tend to rely on my trifield. An early purchase of some non-groundable swiss naturell material was a really expensive mistake! It's a big learning curve.
Erin
Hey Erin,
Sorry I missed your reply.
1) The plates are the same as the plates for the paint, here: https://www.electrahealth.com/YShield-Paint-Grounding-Kit_p_171.html You would just need 1 grounding plate per canopy.
2) The plate works best, so I would use the plate with this: https://www.electrahealth.com/Grounding-Cord-with-Outlet-Plug_p_174.html - get one of these for each canopy
3) I don't think it's silly. It wouldn't hurt anything, so you could go ahead and leave that. I would ground it though. You could ground it with one of the grounding cords - we can put an alligator clip on it. That or you'd have to get it into the grounding plate with the fabric. It kind of just depends on how things are situated and how you'd like to do it, but either would work fine :)
ElectraHealth Principal
Click here for personal 1-on-1 help with me